txt5:WARNING That is a NOT a NORMAL text type file, transmitting it may cause BIG problems. Select 'OK' to continue or 'Cancel' to abort.
txt6:! REALLY ! Whilst transmitting a file !
txt7:The time cannot be set while connected.
txt8:Select 'OK' to empty the buffer, beware as this cannot be undone.
txt9:The receive buffer is already empty.
txt10:Term 93 has suffered a fatal error and MUST close NOW !
txt11:The tx window does not have the caret.
txt12:I have nothing to transmit (what a drag).
txt13:The buffer memory cannot be recovered while the TX text is still being stored. Un-tick 'TX Buffer' (f7 if the tx window has the caret) and try again.
txt14:Select 'OK' to clear the receive screen
txt15:You are still connected, select 'OK' to end the program.
txt16:A 'download' file is still open.
txt17:The receive buffer contains data, do you wish to save it ?
txt18:An error has occured saving to disc.
txt19:The logbook facility will not be available as the filer has NOT seen the directory !LogBook.
txt20:There is an error finding the file "!Term93.User_2.footer" therefore the end of message line (/ex) will not be sent.
txt21:Select 'OK' to empty the buffer ?
txt22:There is an error spooling to disc !
txt23:There is an error. Please check the filename.
txt24:File exists. Appending new text.
txt25:A log entry was open it has been closed, you may want to check it is valid.
txt26:A log entry is still open, please close it first.
txt27:Clearing receive screen while the rx buffer is open may cause a loss of data.
txt28:Clearing receive screen while a 'spool to disc' file is open may cause a loss of data.
txt29:There are NO files open.
txt30:A connect status has been detected.
txt31:The receive buffer will only be default if these settings are saved. To use the receive buffer now it must be triggered from the menu.
txt32:Data transfer has failed, receiver died.
txt33:To save drag the icon to a directory viewer.
txt34:!Term93 has run out of memory, use the task manager to release some or change to a lower screen mode or save and empty the buffer.
txt35:There is insufficient memory to use the buffer, you need to use the task manager to release some.
txt36:You must enable the rx buffer before using this facility.
txt37:There is not enough free memory in the RMA, either use the normal save routine (f3) or increase your 'Module area' slot (you can put it back afterwards) and try again.
txt38:There is nothing to search for, please enter a search string.
txt39: The podule (card) you require either does not exist or has not been recognised. The term93 default driver has been installed.
txt40:Not while transmitting another file, please try again later.
txt41:Clear markers? Click on 'OK' to clear or 'Cancel'.
txt42:Both markers must be set first.
txt43:Markers must be 4 or more lines apart.
txt44:Sorry, can't change colours in this window when text is an anti-aliased font.
